Awning Parts

2 x 2 inch Aluminum Angle Pieces, approximately 2 1/2" long, for all types of Crafting and Custom projects, .093 Thick, White. Paintable, Drillable,.... 

Low Pro HoldBack Clip for HV Bahama Shutter Systems. The nylon bushing is 3/4" Long by 5/8" Diameter with a 1/4" center hole, the bracket..

28mm Ball Bearing End Cap Idler, choose for 40mm or 60mm Tube, made of Hard Plastic, for Roll Shutters and Awnings, Includes the Ball Bearing.

Hz TRANSMITTER Wall Switch, 5 Channel Recessed Designer style, choose White or Ivory. 20A.

Double 28mm Ball Bearing End Cap Idler for 58-60mm Tube, made of Hard Plastic, for Roll Shutters and Awnings, Includes the Mounting Bracket.

60mm Octagonal Plastic End Cap with Hex Peg, for Awning Gears and Roll Shutter Tubes.

60mm Plastic End Cap with 13mm Square Peg, for Awning Gears and Roll Shutter Tubes.

Adjustable Articulated Cap for Roll Shutters, quadruple swivel on center. Both caps are 60mm. Includes the Ball Bearings.

Advertise on HurricaneShutterHardware.com , a Page 1 Ranked Website with visits by mostly Homeowners. Limited Categories and Advertisers!

Awning F-Brackets, Heavy Duty, 1 Pair, Aluminum, White

Awning Crank Ring Eyelet for Gears or Tubular Roll Shutter motors, Hex Shaft, can be inserted directly into a Manual Override Motor, or.... 

Awning U Brackets, Heavy Duty, 1 pair, New Replacement Parts, includes the Channel Screw Pin

HV Bahama Shutter Female 1" Buildout Hinge, for Replacement or New Installations, These are made of smooth Aluminum...

HV Bahama Shutter Female Hinge side, for Replacement or New Installations, These are made of smooth Aluminum...

HV Bahama Shutter Male Hinge, for Repairs or New Installations, and Clamshell Awnings. These are made of smooth Aluminum...

HV Bahama Shutter Male Hinge Frame, for Replacement or New Installations, These are made of smooth Aluminum...

HV Bahama Shutter Hinges, Low Profile Style, Both Male and Female Side, for Replacement or New Installations, These are made of smooth...

Replacement Bell for Roll Shutter Crank Handles, includes the Spring Pin for easy repair of your broken crank handle. Nickel Plated.

Bonded Washers, Stainless Steel washers heat bonded to rubber washers to make a 2 sided dual washer for many purposes, 1/4" hole. 3 sizes.

Wood Bushing Insert Tool, Power Driver Style, 6 inch, for setting 1/4-20 Brass Wood Bushings.

Canopy Female Pin, 2 sizes, includes the Bolt, for Architectural Overhangs, Boat Railings,... 

Canopy Saddle Brackets, for Patios, Signs, Enclosure Repair, Fence Posts, or any General Purpose project. 

Bahama Shutter Ceiling Hinges and Clamshell Awning Hinges, Both Male and Female Side, for Replacement or New Installations, Mill Finish Silver

Clamshell Awning Female Flat Hinge, for Replacement or New Installations, or a Bahama Shutter Ceiling Hinge. These are made of smooth Aluminum...

Heavy Duty Square Tube, 1" x 1" x 1/8", Aluminum, mill finish Silver Only. Choose Length....

Hook Eyelet Ring for Universal Pivots, can be used for Awnings or Roll Shutters, Hex Shaft can be inserted directly into a Manual Override Morot, or.... 

Horizontal Rail Frame for Colonial Shutters, H Rail Bar, Shipped by the Foot up to 6' Lengths, Made of Aluminum it comes to you "Mill Finish", ready to be...

Idle Side Adjustable Pivot Arm, Aluminum Cap, select 60mm or 70mm, choose Metal or Plastic, for Roll Shutter Tubes

Limit Switch Tool, 7-1/2" Plastic, used for setting the white and red limit switches on 35mm to 59mm Tubular Motors.

Panelmate Pro Anchors 3.25", 2 Stud Sizes, Choose total Pieces desired, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

Panelmate Pro Anchors, Extra Large, 3 Sizes with 1 1/8" Stud, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

Retractable Awning Gear 11;1 Ratio, Heavy Duty, Copper Core, Steel Casing, White,...

SHIEN SM35R Standard Remote Tubular Motor kit, for Curtains and Blinds, 10Nm Torque. Includes Instructions,....

SIMU Hz Transmitter Remote for SIMU brand Roll Shutter motors, 1,5 or 16 Channel, Radio Controlled Systems, White only.

Square to Hex Coupling, for mating Square Universal Pivots to Hex side hole Gears, Adaptor Extension Shaft, connects 7MM Hex shaft to 8mm Square shafts.

Square to Square Coupling, for mating 8mm Square Universal Pivot shafts.

2” STORM BAR CLIP, also called a Tie Back Clip, Aluminum Mill Finish with holes. Receives 2” Square Tube 

UNIVERSAL Key Switches for Roll Shutters, Surface Mount, MOMENTARY Style. Comes with 3 Keys,...

Universal Pivot with Eye Ring for Roll Shutters and Awnings, 45 Degree Head, 2 Hole Mount, Square or Hex Drive, fits standard Crank Hooks.

Universal Wireless Receiver for ALL BRANDS of Roll Shutter Motors, Hz Radio Control. Makes any Standard motor a Remote motor, or replaces an existing system.

286-868MHZ Multi-Frequency Clown Universal RF Copy Remote Control Wireless Mini Duplicator Cloning Remote for Tubular Motors

Awning Cone Cover Plate, White, 3 3/4" Diameter, for 3/4" Pole. Aluminum.

Awning Z Clips, made of Galvanized Steel. 1.5" x 2.5" x 1/8" thick

DOOYA Keychain Emitter, 1 Channel Remote Controller for DOOYA Roll Shutter Recievers and Motors, 12V

Serrated Tubing for Bahama Shutters and Clamshell Awnings, Raw 4 , 5 , or 6 Foot Lengths, You Cut to size and drill holes. Both Inner and Outer Pole plus Slip Collar.

Universal for Roll Shutters, 90 Degree Head, For 7” End Caps or Less, 2 Hole Mount, Hex Drive only. Includes the Bullet,....

Galvanized Steel Z Clips for Awnings, 1.5 x 2.5 x 1/8 thick. Choose total Pieces from 4 pieces thru 50 piece set, then Quantity 1,.. 

Awning Handle Crank with Hook, Manual Hand Crank, 5 Feet Long, Shipped Assembled, Plastic Coated Metal, Hard Plastic handles. Both Handles Spin,..

HV Bahama Shutter Hold Down Brackets, 4 inches long, for mounting into Concrete, select from 4 Colors. 2 per Quantity ordered! 

HV Bahama Shutter Hold Down Brackets, 4 inches long, for Wood mounting, select from 4 Colors. Left and Right Sides.

Bahama Shutter Arm Kit, Telescoping Poles, and for ClamShell Awnings, 1 Pair, Choose Length, 4 colors, includes Camelback Brackets, Pins,

Camelback Brackets for Awning Poles and Bahama Shutters, 3 Sizes, select Quantity desired. Brackets have the One Way notch for the Camelback Pin.

Camelback Pins, Awning and Shutter Pole Pins, 3 1/2" Large or 2 1/2" Small, select Quantity desired. They are 1/4" in Diameter,..

HV Colonial Shutter Storm Bar Clips, 4 Colors to choose from. These are Shutter Mount style. White, Black, Bronze, or Silver (mill finish). 4 Pieces per Quantity ordered.

Crank Handle with Bell, Nickel, 5 Feet Long, for Roll Shutters, Manual Handcrank Bar. This kit comes with a Wall Clip Holder 

Camelback Brackets for Awning Poles and Bahama Shutter arms, 3 Colors, Select Total Pieces desired, Made of Aluminum.

7MM Universal Hex Coupler for Extension Shaft, mates with 7MM Hex Extension Shaft for Universals. It is 1 3/16" long, and comes with...

Hz Radio Controlled External Keypad Transmitter for SIMU Roll Shutters, made by SIMU, Controls up to 2 Hz Motors, Digital, Frequency 433.42 ...

Hz Keychain Transmitter Remote Control, 4 Channel, by SIMU, for SIMU brand Motors and receivers.

Aluminum Keyhole Washers, Select 25 pieces to 100. Most commonly used with Combo Truss Machine Screws size 1/4-20, but these,...

Locking Hole Plugs for Roll Shutter Tracks and Bahama Shutter Arm Poles, Black or White, Many Sizes to choose from. Select Size, then...

Panelmate Pro Anchors 2.25", 2 Stud Sizes, Choose total Pieces desired, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

Click this $$$ product to pay for a Custom Phone Order, or for Expedited Shipping, or...

Roll Shutter Crank Handle Kit, 10 Feet, includes Crank Handle Extension Pole, SS Handle Extension with Pin, the Bell, Pick-up Only....

Small Thumb Turn Knob Screws, 1/4-20 x 3/4", Stainless Steel, with Shoulder, Select from 6 pieces thru 50. Choose Black or White,...

Telescoping Pole for Clam Shell Awnings, Tents, and Bahama Shutters, 1 pole, choose Lengths from 12 to 36 inches, and select from 4 Colors,...

Large Turn Knob Handles, Black or White, with Shoulder Stop. 5/16-18 x 1", Turn Knob Screw Handles, Stainless Steel, White or Black,...

Universal for Roll Shutters, 45 Degree Head, Choose Exterior or Interior, Choose Hex or Square Drive. Includes the Bullet,....

Locking Wall Clip for Crank Handles. This Wall Clip fits most type crank handles with a 1/2 inch diameter pole, made of plastic,...

Trailer Mounting Plate for Awning Bracket, Holdown Bracket, 2" x 2", attaches to your home, RV, or mobile home as a mounting plate, to hold the awning Closed...

Slip Collars for Awning Poles and Bahama Shutter Arms, Awning Rings, Choose 1" or 7/8", Select Total Pieces Desired. Made from Aluminum,

U Brackets, for Awnings or Bahama Shutters, 1" Aluminum, New Replacement Parts, fits 1" or 3/4" poles. The U-Bracket is...

Lance Awning Clip, 3 1/4" Long - 1" Wide, Made with 1/8" Aluminum Stock. Rare Awning Replacement Part.

Aluminum Gear Insert, choose 60mm or 70mm, for Roll Shutter Tubes or Reels. 13mm Square insert hole (9/16").

60MM Plastic Gear Insert, for Roll Shutter Tubes or Reels. 13mm Square insert hole (9/16").

Roll Shutter Gears, Select Plastic or Metal, Choose 11:1 Ratio or 8:1 Ratio. 7MM Hex. Each kit comes with the Roll Shutter Gear, a Gasket,...