Related Items
DOOYA Roll Shutter Tubular Motor Type 5, Standard DM45S, or with Override DM45M. These have 4 wires.
Standard Motor;
449K - 50 Nm, 13rpm, 21.5”, 120V, 60Hz, 235W, 2.2A, IP44, 150-246 lbs (same as 550 models)
Standard w/Override Motor;
423K - 50 Nm, 13rpm, 24”, 120V, 60Hz, 235W, 2.2A, IP44, 150-246 lbs (same as 550 models)
Includes 60MM or 70 MM Crown and Drive
** Note about Buying a Tubular Motor from us; All our Manual Override type motors, use a HEX SHAFT for the Motor Gear connection to the Universal Pivot, if you have a Square Shaft you'll need to replace the Universal Pivot or use our Square to Hex Coupling Adaptor.
Standard comes with 1 Mounting Bracket plus 1 Alternate Bracket.
Standard with Override comes with 1 Bracket.
DOOYA® Roll Shutter Motors come with a 5 Year Warranty, Instructions, Limit Switch Tool.
Please call Customer service at 561-255-1102 for help ordering the correct motor if your unsure.... Please have your Make & model number handy, and know what size tube or sleeve you have (58mm Hex, 60mm/70mm Round/Hex, 94mm, 100mm).
*If you'd like to upgrade your Dooya setup to a Remote Motor System simply buy the same size equivalent Dooya Remote Motor Kit.
**Note about installing Tubular Motors;
If you are testing a tubular motor for electrical current or trying to set the limit switch, you must do it in the tube (or a test tube) as the Crown & Drive Must Spin Together, or the motor will not reset itself, or the motor may not shut off, or the limit switch will not stay in the same position!!!!!