Shutter Supply

Shutter Supply, Including Locks, Pins, Screws, and Supplies for Awnings too. Accordion, Centerfold, Bahama, Colonial, Roll shutters, and more.

Galvanized Steel Storm Panels Aluminum Channel Rail 2 x 1
Galvanized Steel Storm Panels2x1 Aluminum Channel Rail

Galvanized Steel Storm Panels, Corrugated, made by BERTHA®, Miami Dade High Velocity Hurricane Zone Approved .030 Thick, Pick-up Only

Aluminum Channel Rail 2" x 1" x .125", Heavy Duty, for Mechanical Fencing, or Storm Panel Track Buildouts, sold by foot lengths. 

$11.99

$20.99

Aluminum Channel Rail Sleeve for 2 x 1 Aluminum Channel Rail 2 x 2
2x1 Channel Rail Sleeve2x2 Aluminum Channel Rail

Aluminum Channel Rail Outside Sleeve, 2 1/4" x 1 1/4" x .125" OD, Heavy Duty, for 2" x 1" OD Mechanical Fencing, or Storm Panel Track Buildouts, 6 foot lengths. 

Aluminum Channel Rail 2" x 2" x .125", Heavy Duty, for Mechanical Fencing, or Storm Panel Track Buildouts, sold by foot lengths. 

$37.99

$25.99

Aluminum Channel Rail 3 x 1 A-OK Tubular Roll Shutter Motors, Remote Type 5
3x1 Aluminum Channel RailA-OK Remote Motors T5

Aluminum Channel Rail 3" x 1" x .125", Heavy Duty, for Mechanical Fencing, or Storm Panel Track Buildouts, sold by foot lengths. 

A-OK Remote Roll Shutter Tubular Motor Type 5, Standard, 3 Wire. AM45-50/12-E, 50Nm, 120V, 60Hz, 300W, 2.5A, 12rpm, IP44, 4 min, Class H 

$24.99

$149.99

Accordion Shutter Locks Accordion Shutter Track Cover inserts
Accordion Shutter LockAccordion Track Cover Insert

Accordion Shutter Locks, HV Style, available in 4 colors, Keyed or Thumbturn, Push Button, Push Pin,.. OEM Replacement Lock

Accordion Shutter Track Covers, Colored Vinyl Inserts that snap into the track to keep dirt and leaves out. 4 Colors, each 4 feet long.

$13.99

$24.99

Accordion Shutter Track End Caps Aluminum Storm Panels
Accordion Track End CapsAluminum Storm Panels

Accordion Shutter Track End Caps, White Nylon, UV Resistant, Square End Cap Cover, 1 7/8" x 1 3/8", with keyway notch to hold it tight.

Aluminum Storm Panels, 2 1/4" Corrugated, BERTHA .050 Aluminum Sheets, 12 inches wide. Choose Length, CUSTOM CUT SIZES.

$10.99

$19.99

Astroguard Hurricane Fabric Clips Awning Crank Handle and Hook Pole kit
AstroGuard Fabric ClipsAwning Crank Handle with Hook

Astroguard Hurricane Fabric Clips, Black Nylon, made by BERTHA, sold in Male and Female set as 1 piece, includes the screws, OEM Replacements 

Awning Handle Crank and Hook, Manual Hand Crank, 5 Feet Long, Shipped Assembled, Plastic Coated Metal, Hard Plastic handles. Both Handles Spin,..

$13.99

$40.99

Bahama Shutter Arm Kit, Awning Poles Replacement Bell for Roll Shutter Hand Crank
Bahama Shutter Arm Kit, 1 pairBell for Crank Handles

Bahama Shutter Arm Kit, Telescoping Poles, and for ClamShell Awnings, 1 Pair, Choose Length, 4 colors, includes Camelback Brackets, Pins,

Replacement Bell for Roll Shutter Crank Handles, includes the Spring Pin for easy repair of your broken crank handle. Nickel Plated.

$40.99

$16.99

Bottom Slat Weather Seal for Roll Shutters Brass Wood Bushing Anchor
Bottom Slat Weather SealBrass Wood Bushing Anchor

Bottom Slat Weather Seal for Roll Shutters, Black Rubber Bulb Gasket Seal, Fits 40mm, 55mm, 58mm, and 60mm Slats. Choose Length.

Brass Wood Bushing Anchors, Slotted, 1/4-20 Inner Thread, Wood Anchor Bushing is 3/4" Long by 1/2" Diameter, choose Quantity.

$13.99

$9.99

Build Out Header for Storm Shutter Panels Bullet and Clip for Colonial Shutters
Build Out Header 2 1/4Bullet and Clip

Build Out Header, Choose 1, 2, or 3 inch Build Out Distance, for 2 1/4" Rib Size Depth Panels, Choose Lengths up to 19', Select White or Bronze.

Bullet and Clip for Colonial Shutters, 2 Sizes to choose from, used to hold the shutters open, both are Chrome Plated. 1/4-20 threads. 

$36.99

$29.99

Bullet for Universal or Crank Handle Bell Cable Tie Wrap 3 Feet
Bullet for Universal PivotCable Tie Wrap 3'

Bullet for Universal Pivot, Roll Shutter Crank Handle Bullet for Bell. Mates with bell for a removeable crank handle. Includes the screw.

Cable Tie Wraps, Super Heavy Duty 1/16" Thick Nylon, 3 Feet Long by 3/8" Wide, Holds up to 150 pounds each, Black Only, UV Resistant,..

$13.99

$8.99

Camelback Brackets with Pin Clamshell Awning, Bahama Hinges
Camelback Brackets with PinClamshell Awning Hinges Rail

Camelback Brackets for Awning Poles and Bahama Shutters, 3 Sizes, select Quantity desired. Brackets have the One Way notch for the Camelback Pin.

Bahama Shutter and or Awning Hinges, Both Male and Female Side, for Replacement or New Installations, Mill Finish Silver

$12.99

$29.99

Colonial Shutter Double Hinges Kit 2.25 Colonial Shutter Double Hinges Kit
Colonial Double Hinges 2.25Colonial Shutter Double Hinges

Colonial Shutter Hinges, Flat, Both Male and Female Side, for Replacement or New Installations, These are made of smooth Aluminum...

Colonial Shutter Hinges, Flat, Both Male and Female Side, for Replacement or New Installations, These are made of smooth Aluminum...

$38.99

$39.99

Colonial Shutter Flat Hinges Kit Colonial Shutter Single Hinges Kit
Colonial Shutter Flat HingesColonial Shutter Single Hinges

Colonial Shutter Hinges, Flat, Both Male and Female Side, for Replacement or New Installations, These are made of smooth Aluminum...

Colonial Shutter Hinges, Flat, Both Male and Female Side, for Replacement or New Installations, These are made of smooth Aluminum...

$29.99

$35.99

Combo Brass Lead Anchors Combo Drill Bit, Domestic
Combo Brass Lead AnchorsCombo Drill Bit, Domestic

Combo Brass Lead Anchors, for use with any size length 1/4-20 bolt, pass thru style. Zamac Body / Brass Core. Bolt Anchor Fastener is...

Combo Drill Bit, 1/4" x 1/2" x 2", Domestic Professional Version, used to drill perfect pilot holes and counter sink for Anchors. 

$12.99

$18.99

Conical Stop for Roll Shutter, Hole Plug Corner Bay Hinge Bracket
Conical Stop Corner Bay Hinge Bracket

Conical Stop for Roll Shutters, or Hole Plug, 4 Colors to Choose from, includes Bolt. White, Ivory, Beige, or Bronze. 1 9/16" Long, 3/4"OD - 1"OD.

Corner Bay Hinge Bracket, 2 Styles to Choose from, Heavy Duty 2.5mm Thick, White Powder Coated Steel. 4 Corner Bay Hinges per Quantity ordered,...

$9.99

$17.49

Camelback Brackets, Black, White, Bronze DOOYA Roll Shutter Motors, Remote Type 5
Designer Camelback BracketsDOOYA T5 Remote Motors

Camelback Brackets for Awning Poles and Bahama Shutter arms, 3 Colors, Select Total Pieces desired, Made of Aluminum.

DOOYA Remote Roll Shutter Motors, Type 5, DM45R, choose Standard or With Override, Choose 30Nm or 50Nm, includes 60MM & 70MM Crowns, Drives, Bracket,... 

$13.99

$189.99

DOOYA Roll Shutter Motor Type 5 Standard DOOYA Roll Shutter Motor DM59S
DOOYA T5 Standard MotorsDOOYA T6 Standard Motors

DOOYA Roll Shutter Tubular Motors, Type 5, Standard DM45S, or With Override DM45M, Select 50Nm or 30Nm

DOOYA Roll Shutter Motor Type 6, Standard or With Override, DM59S and DM45M, Both 100NM, 11RPM, 120V, 60Hz , 340W, 2.94A, IP44, 256-386lbs

$149.99

$229.99

Dovetail Pins, Plastic Inserts Essentric Butterfly Hinge, White
Dovetail Pins, PlasticEccentric Butterfly Hinge Large

Dovetail Pins, Plastic Inserts, Keyways, 3 Sizes to Choose, Then Select Total Pieces desired.

Eccentric Butterly Hinge, White, 37mm x 76mm x 2mm Thick Powder Coated Steel. 4 Butterfly Hinges per Quantity ordered.

$5.99

$13.99

Eccentric Butterfly Hinge, Small End Retention Slat Lock Glides 55mm
Eccentric Butterfly Hinge SmallEnd Retention Slat Lock Glide 55mm

Eccentric Butterfly Hinge, White, 30mm x 60mm x 2mm Thick Powder Coated Steel, 4 Butterfly Hinges per Quantity Ordered.

End Retention Slat Lock Glide 55mm, Black Plastic, includes Top and Bottom. End Retention Slat Lock Glides are inserted into the ends of the Roll Shutter slats to keep them from sliding.

$13.00

$12.99

End Retention Slat Lock Guide 55mm End Retention Screws
End Retention Slat Lock Glide 58mmER Screws for 55mm Slats

End Retention Slat Lock Glide 58MM, Hard Nylon, Left and Right sides sold as a Set Together, Black Only. Base is 2 5/8" Long by...

End Retention Screws for 55mm Slat Lock Guide, HV Hi Velocity, Coated Stainless Steel, 10 x 2 1/2" Phillips Head, choose Total Pieces desired.

$9.99

$6.99

Hat Bushing for Wheel Carriages Hidden Handle, Recessed Flat Handle
Hat BushingsHidden Handle

Replacement Hat Bushings, for Wheel Carriages, 3 sizes to choose from, Select quantity desired, White. Made of Heavy Duty UV Resistant Nylon.

 

Hidden Handle, Recessed Flat on Surface, must push one side for Arm Handle to Pop Out, to pull the cabinet door or shutter open.

 

$4.99

$18.99

Hidden Hinge Low Pro Holdback Clip for Bahama Shutters
Hidden HingeHoldback Clip, Low Pro

Hidden Hinge, for Shutters and Cabinets, made of a Heavy Duty Steel that is shiny. It needs a rounded hole 1 1/4" x 1/2" for the insert side. The Hidden Hinge,...

Low Pro HoldBack Clip for HV Bahama Shutter Systems. The nylon bushing is 3/4" Long by 5/8" Diameter with a 1/4" center hole, the bracket..

$17.99

$14.99

HV Nylon Thumbscrews HV Studded Track Plate and Cover
HV Nylon Thumb ScrewsHV Studded Track Plate

HV Nylon Thumb Screws, 3/8-16 x 3/4", with Shoulder. Choose how many HV White or Black Nylon Thumb Screws you need, 6 to 48 pieces,... 

HV Studded Track Plate and Cover, 6 or 12 inch on center, for use with Storm Panels. Choose desired Length. Aluminum. White only.

$8.99

$24.99

HV Style Large Turn Knobs Installation Testing Switch
HV Turn Knob HandleInstallation Testing Switch

HV Style Large Turn Knobs, Stainless Steel, 5/16-18 Thread Size by 1 inch Long, with Shoulder Stop, Choose Black or White,... Choose quantity from 4 pieces to 50

120V Test Switch for Roll Shutter Installations, a must have for Professionals, also compatible for most all other Electrical type Installations.

$14.99

$119.99

Interlocking Horseshoe Shims J Clip for Accordion Shutters
Interlocking Horseshoe ShimsJ Clip for Accordion Shutters

Adjustable Interlocking Shims, Horseshoe Shaped, Breakaway Style, Plastic, 50 Pieces, Perfect for Shutters, Doors, Windows, or...

J Clips for Accordion Shutters, for use with T handle Type Lock shutters, these J Clips fasten below the lock holding the panel ends together 

$11.99

$12.99

Keeper and Cam for T Handle Shutter Lock Cylinder Lock, Brass
Keeper and Cam KitKeyed Cylinder Lock

Shutter Cam and Keeper Kit for T Handle Locks, Set includes the Keeper, Stainless Steel Screw, Cam, and Plastic Bearing. Each Set counts as 1 piece, select how many

Cylinder Lock, Brass, Silver Finish, With 2 Keys, includes 1 AL Ring. Fits Hi-Rise Mortise Locks and Others, 1 1/8" thread diameter. 

$10.99

$17.99

L Bracket for Plantation Shutters L-Hinge for Shutters and Cabinets
L Bracket for ShuttersL Hinge for Shutters, Cabinets

L-Bracket for Plantation Shutters, White, 4 pieces per Quantity ordered. Choose Small or Large size. Base dimentions are the same on both sizes, 2" x 1 5/8" Flat, by...

L Hinge for Shutters and Cabinets, Powder Coated White Metal, 2 Styles to choose from, For use around corners and,... Choose 4 L-Hinges thru 50 pieces.

$15.99

$18.99

Locking Hole Plug Locking Pins for Accordion Hurricane Shutters, with Screws.
Locking Hole PlugsLocking Pins for Shutters

Locking Hole Plugs for Roll Shutter Tracks and Bahama Shutter Arm Poles, White Only, Many Sizes to choose from. Select Size, then...

Aluminum Locking Pins, Accordion Shutter Pins, Sliding Rods, and for Centerfold Hurricane Shutters, 1 pair, Choose Length, Select Screw Size

$7.59

$9.99

Mortise Hook Lock Body Panelmate Combo Bit
Mortise Hook Lock BodyPanelmate Combo Bit

Mortise Hook Lock Body Only, no locks or face plate. Stainless Steel, Hi Rise Lock. #304 Hook Bolt, 1 1/8" Cylinder Hole....

Panelmate Combo Bit, Domestic (Made in USA), not the cheap import economy version, this is Professional Grade made to last...

$22.99

$39.99

Panelmate Plus Anchors for Wood Panelmate Pro Anchors 2.25 inch
Panelmate Plus AnchorsPanelmate Pro Anchors 2.25

Panelmate Plus Anchors, made of 18-8 Stainless Steel, for Wood Applications

Panelmate Pro Anchors 2.25", 2 Stud Sizes, Choose total Pieces desired, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

$11.99

$15.99

Panelmate Pro Anchors 3.25 inch Panelmate Pro Anchors Extra Large
Panelmate Pro Anchors 3.25Panelmate Pro Anchors XLarge

Panelmate Pro Anchors 3.25", 2 Stud Sizes, Choose total Pieces desired, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

Panelmate Pro Anchors, Extra Large, 3 Sizes with 1 1/8" Stud, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

$16.99

$18.99

Panelmate Pro Female Anchors Panelmate Pro Male Anchors
Panelmate Pro Female AnchorsPanelmate Pro Male Anchors

Panelmate Pro Female Anchors, 4 sizes, select Total Pieces Desired. These have a 1/4-20 threaded hole, and a 5/16" Hex Driver is needed 

Panelmate Pro Male Anchors, Stainless Steel with Silver Stalguard Coating, 14 x 1 3/4", with 1/4-20 x 1/2" threaded hole. Needs a 3/8" Hex Socket to screw in.

$25.99

$19.99

Price Adjustments Push In Screw Plug
Price AdjustmentsPush In Screw Plug

Click this $$$ product to pay for a Custom Phone Order, or for Expedited Shipping, or...

Push In Screw Plugs, White Nylon, for Panelmate Pro Female Anchors, they Push in but need a Screwdriver to remove, can be used as an Automotive clip,.. 2 Sizes

$0.01

$6.99

Rapidset Tool for Lead Anchors Recessed Bushings for Shutters
Rapid Set Tool for AnchorsRecessed Nylon Bushings

Rapidset Tool for Lead Anchors, Professional Model, not a punch its a threaded power bit that screws the anchor to set it in place, for 1/4-20 size threads. 2 Sizes.

Recessed Bushings for Hurricane Shutter Screws, covers the head of the screw, 6 sizes to select from, White only. UV Resistant.

$49.99

$4.19

Roll Shutter Crank Handle Extension Kit Roll Shutter Toggle Switches
Roll Shutter Crank Handle 10' KitRoll Shutter Toggle Switches

Roll Shutter Crank Handle Extension Kit, 10 Feet, includes Crank Handle Extension Pole, SS Handle Extension with Pin, the Bell with Pin...

 

Toggle Switch for Roll Shutters, Single Pole, 20A, choose Maintained or Momentary, select White or Ivory

 

 

$89.99

$27.99

Roll Shutter Track Hole Plugs Screw Anchor Expander for Hollow Walls
Roll Shutter Track PlugsScrew Anchor Expander

Roll Shutter Track Locking Hole Plugs, End Caps, for 5/8" holes, 4 colors,

Screw Anchor Expander for Hollow Walls and Concrete Blocks, Made by GREENLEE, 1/4-20 Masonry, Made in USA of Hardened Alloy Steel.

$7.59

$99.99

Screw Protectors, White Nylon Caps SDS Tapcon Bit Adapter
Screw ProtectorsSDS TAPCON Bit Adapter

Screw Protectors for Panelmate Pro Anchors, White Nylon Caps, UV Resistant, 1 1/8" Long, or use for any 1/4-20 size thread screw or bolt.

SDS TAPCON Bit Adapter, comes with the allen wrench.

$6.99

$19.99

Setting Tool for Lead Anchors Snap Track Shutter Holdback Clip
Setting Tool for Lead AnchorsShutter Holdback Clip

Lead Anchor Setting Tool, 6 inch model, used to set anchors in place by spreading the head without stripping the threads, made for...

Snap Track Cap Holdback Clip for Accordion shutters, UNIVERSAL, 3 Sizes to choose. Made of Tough Nylon to last years. Also Choose...

$14.99

$11.99

Sidewalk Bolt Anchors, Lead Sidewalk Bolt Power Bit
Sidewalk Bolt Lead AnchorsSidewalk Bolt Power Bit

Combo Sidewalk Bolt Lead Anchors, for use with any size length 1/4-20 bolt, pass thru style. Zamac Body / Lead Core. Bolt Anchor Fastener is...

Sidewalk Bolt Power Bit, works for both Combo and Slotted Sidewalk Bolts. Beveled Spring Loaded Sheath. Bit is 4" long, made of High Strength Carbon Steel,..

$9.99

$17.99

Sidewalk Combo Bolts, 2 Sizes SIMU Gear Connector 16MM x 13MM, for 1424 Gears
Sidewalk BoltsSIMU Gear Connector, Adapter

Sidewalk Combination Bolts, 1/4-20 Thread Size, Choose Length. They have a Flat Round Head with Beveled edges, combination Phillips - Slotted...

SIMU Gear Connector, for use with with the style No. 1424 SIMU Gear, it is a 16MM Square x 13MM Square Gear Adapter for the,...

$8.49

$13.99

Roll Shutter Motor, Type 8 Standard, SIMU Roll Shutter Motor, type 5 Standard, SIMU
SIMU Overide Motor Type 8SIMU Remote Motors Type 5

SIMU Roll Shutter Motor Type 8 Standard with Override, Tubular, 200Nm, 94MM Diameter, 10RPM, 120V. Crowns, Drives, and Brackets sold separately. 

Roll Shutter Motor Kits by SIMU, Remote Type 5, Standard or With Override, Crowns, Brackets, Drives, and Single Channel Emitter Included...

$619.00

$329.00

SIMU Roll Shutter Motor, Override, Type 5 SIMU Roll Shutter Motor T6
SIMU Standard Motors Type 5SIMU Standard Motors Type 6

Roll Shutter Motor Kits by SIMU, Standard or With Override, Type 5, DMI5, 50Nm, 12RPM, 120V, 4 wire, 

SIMU Roll Shutter Tubular Motor Kit, Standard or With Overide, Type 6, 100Nm, 14RPM, 120V, 60Hz, 246-358Lbs. Crowns, Drives, and Brackets Included

$409.00

$449.00

Slat Lock Guide 40mm Slat Lock Guide 58mm for Roll Shutter
Slat Lock Glide 40MMSlat Lock Glide 58MM

Slat Lock Glide 40MM, 2 piece Left and Right Set, Hard Black Nylon, for Roll Shutters. Made by BERTHA®. 40mm Slat Lock Glide is 1 7/8" Top Length,..

Slat Lock Glide 58MM for Roll Shutters, Black Nylon. They are 2 5/8" Long by 1/2" Wide ends, holes are spaced 1 5/8" on center. 

$6.99

$7.99

Roll Shutter Slat Track Felt Slip Collars, Awning Rings
Slat Track FeltSlip Collars, Awning Rings

Track Felt for Roll Shutter Slats, Black .320 or Grey .160 thick, made by BERTHA. Black .320 thick is considered the Universal Replacement, 

Slip Collars for Awning Poles and Bahama Shutter Arms, Awning Rings, Choose 1" or 7/8", Select Total Pieces Desired. Made from Aluminum,

$13.99

$11.89

HV Snap Track End Cap Solar Roll Shutter Motor, Remote OverrideType 5
Snap Track End CapSolar Remote Override Motor Kit

HV Snap Track Cap End Plate, for HV Studded Plate with Cover, By BERTHA 

Order 4 clips to 100.

DOOYA Solar Remote Override Roll Shutter Motor Kit, Type 5, includes 60MM & 70MM Crowns, Drives, Bracket, 5 Channel Emitter, Solar Panel Kit... 

$11.99

$589.99

Solar Thread, UV Resistant Hex Coupler for Universal or Shaft, 7MM
Solar Thread, UV ResistantSOMFY Hex Coupler, 7MM

Solar Thread, UV Resistant, Made by BERTHA©, 8 oz Spool, Choose Black or White, 2000 Feet each. Perfect for any type repairs on...

7MM Universal Hex Coupler for Extension Shaft, mates with 7MM Hex Extension Shaft for Universals. It is 1 3/16" long, and comes with...

$140.00

$16.99

Paddle Switches for Roll Shutters Square to Hex Coupler for Universal Pivot Shaft
SOMFY Paddle SwitchesSquare to Hex Coupler

PADDLE SWITCHES for roll shutters, Single Pole, Maintained or Momentary Style. 15A. Designer PADDLE SWITCHES by SOMFY.

Square to Hex Coupler for Universal Pivots and Gears, Adaptor Extension Shaft, mates 7MM Hex to 8mm Square shafts. 

$32.99

$18.99

Studded Angle Track for Storm Panels Studded Angle Track for Storm Panels
Studded Angle Track 12 inchStudded Angle Track 6 inch

Studded Angle Track for Storm Panels, 12"OC, Choose Total Length, Choose White or Bronze. The Studs are 1/4-20 Thread x 3/4" Long.

Studded Angle Track for Storm Panels, 6"OC, Choose Total Length, Choose White or Bronze. The Studs are 1/4-20 Thread x 3/4" Long.

$18.99

$18.99

Studded Reverse Angle Track for Storm Panels Studded Reverse Angle Track for Storm Panels
Studded Reverse Angle Track 12in Studded Reverse Angle Track 6in

Studded Reverse Angle Track for Storm Panels, 12"OC, Choose Total Length, White only. The Studs are 1/4-20 Thread x 3/4" Long.

Studded Angle Track for Storm Panels, 6"OC, Choose Total Length, Choose White or Bronze. The Studs are 1/4-20 Thread x 3/4" Long.

$18.99

$18.99

Studless Angle Track for Storm Panels Tapcon Anchors
Studless Angle F TrackTapcon Anchors

Studless Angle Track for Storm Panels, 90 Degree, White or Bronze, Choose Lengths up to 20 feet, made by BERTHA. 

Tapcon Anchors, Storm Guard, Carbon Steel with Ultra Shield, 2 Sizes, a High Performance Anchor for direct mount panels to Wood, Concrete,...

$18.99

$14.99

Telescoping Pole, Extendable, Arms, Bahama Shutters Track Bolt Alignment Strap, anti-chatter
Telescoping Pole for Awnings, TentsTrack Bolt Slide Strap

Telescoping Pole for Clam Shell Awnings, Tents, and Bahama Shutters, 1 pole, choose Lengths from 12 to 36 inches, and select from 4 Colors,...

Track Bolt Strap, and Bolt Aligner for studless tracks. This Multi Purpose vinyl strapping strip has holes every 6" to fit over your track bolts and stop the chattering

$22.99

$19.99

HV Track Roller Guide Pins Large Turn Knob Screws
Track Roller Guide PinTurn Knob Handle Screws, Large

HV Track Roller Guide Pins, HV = Hi Velocity, 6 Sizes to choose, for Accordion Shutters

Large Turn Knob Handles, Black or White, with Shoulder Stop. 5/16-18 x 1", Turn Knob Screw Handles, Stainless Steel, White or Black,...

$12.99

$13.49

Turn Knob Screws Medium Size U-Bracket
Turn Knob Screw, Medium SizeU Bracket, Awnings, Bahama Shutters

 Turn Knob Screw for Shutter Panels, Medium Size, 1/4-20 x 1", Black or White, 18-8 Stainless Steel, Nylon Head. Choose amount desired.

U Brackets, for Awnings or Bahama Shutters, 1" Aluminum, New Replacement Parts, fits 1" or 3/4" poles. The U-Bracket is...

$7.89

$11.49

U Header for Storm Panels Universal for Roll Shutter Hand Cranks
U Header 2"Universal Pivot 45 degree

U-Header for Storm Panels, the Top Track Channel, Many Sizes to Choose, Select Length, White or Bronze. For 2" Rib Panels, up to 6 feet.

Universal for Roll Shutters, 45 Degree Head, Choose Exterior or Interior, Choose Hex or Square Drive. Includes the Bullet,....

$28.99

$64.99

Universal Pivot for Roll Shutter Hand Cranks Wall Clip for Awning Crank Handles
Universal Pivot 90 degreeWall Clip Holder for Crank Handles

Universal for Roll Shutters, 90 Degree Head, For 7” End Caps or Less, 2 Hole Mount, Hex Drive only. Includes the Bullet,....

Locking Wall Clip for Crank Handles. This Wall Clip fits most type crank handles with a 1/2 inch diameter pole, made of plastic,...

$44.99

$7.59

Wheel Carriages, Panel Rollers Wingnut Hand Driver, Fits Many Size Wingnuts
Wheel Carriages, Panel RollersWingnut Hand Driver

HV Wheel Carriages for Hurricane Shutters , Panel Slide Rollers, 2 pair (4 pieces) per Quantity Ordered. Choose your Size...

Wingnut Hand Driver Tool for Hurricane Storm Panels and Shutters, Brand New, fits all wingnuts from size 10-32 to 5/16" Made in USA,...

$7.99

$15.99

Wingnut Power Driver Bit, fits many size Wingnuts Wood Bushing Setting Tool
Wingnut Power Driver BitWood Bushing Setting Tool

Wingnut Power Driver Bit, fits many size wingnuts, from 10-32 to 5/16" thread. Heavy Duty industrial strength metal. Shutter Tools...

Wood Bushing Tool, Brass T-Handle Style, 6 inch, for setting 1/4-20 Wood Bushings.

$12.49

$18.99

HV Bahama Shutter Hinges Ball Bearing for Roll Shutters
Bahama Shutter Hinges RailBall Bearing for Roll Shutters

HV Bahama Shutter Hinges, Low Profile Style, Both Male and Female Side, for Replacement or New Installations, These are made of smooth...

42MM Ball Bearing with Stainless Steel Bushings, for Roll Shutters. Measures 1 5/8" in Diameter, the center hole is 1/2" diameter, and it's 3/8" wide.

$51.99

$18.99

Camelback Pins CF Shutter Lock Kit, CenterFold
Camelback PinsCF Shutter Lock Kit

Camelback Pins, Awning and Shutter Pole Pins, 3 1/2" Large or 2 1/2" Small, select Quantity desired. They are 1/4" in Diameter,..

CF Shutter Lock Kit, Genuine OEM Replacement Part, Keyed or Thumbturn Styles, for Accordion and Centerfold Shutter Types. 

$8.99

$13.99

Crank Handle Pole for Roll Shutters Complete Mortice Lock, Hi-Rise Shutters
Crank Handle Pole for Roll ShuttersComplete Mortice Lock Kit

Crank Handle with Bell, Nickel, 5 Feet Long, for Roll Shutters, Manual Handcrank Bar. This kit comes with a Wall Clip Holder 

Complete Hi-Rise Mortice Hook Lock and Body Kit, Includes 1 Brass Keyed Cylinder Lock, 1 Brass Thumb Turn Lock, and Face Plate,...

$59.99

$43.49

Holdback Clips for Accordion Shutters Keyhole Washers
HV Shutter Holdback ClipKeyhole Washers

Holdback Clips for Accordion Shutters, HV = Hi Velocity, Choose 4 pieces to 50 pieces. Hard Nylon Clip snaps in track to hold the shutter panels open. 3 colors to choose.

Aluminum Keyhole Washers, Select 12 pieces to 100. Most commonly used with Combo Truss Machine Screws size 1/4-20, but these,...

$12.29

$6.99

Moustache Clips, Stainless Steel Shutter Straps, Hook and Loop, 4 Colors
Mustache Clips Shutter Straps

Mustache Clips for Storm Panels and Shutters, These Mustache Clips are for the older style storm panels, High Strength Stainless Steel.

Accordion Shutter Straps , Choose from 4 Colors, Sizes 24" or 36". The Shutter Straps have a hard nylon loop on one end for tension adjustment...

$13.99

$14.99

SIMU Roll Shutter Gear 7MM Hex -16MM Square Small Turn Knob Screws for Shutters
SIMU Roll Shutter Gear 16MMSmall Turn Knob Screws

SIMU Roll Shutter Gear #1424, 7MM Hex / 16MM Square, 11;1 Ratio. Outer casing is made of hard plastic. It is almost,...

Small Thumb Turn Knob Screws, 1/4-20 x 3/4", Stainless Steel, with Shoulder, Select from 6 pieces thru 50. Choose Black or White,...

$59.99

$9.99

Trailer Plate for Camelback Brackets Hood Roller for Roll Shutters
Trailer Plate for Awning BracketHood Roller for Roll Shutters

Trailer Mounting Plate for Awning Bracket, Holdown Bracket, 2"x 2", attaches to your trailer or mobile home as a mounting plate, to hold the awning Closed...

Hood Rollers for Roll Shutters, 40 x 95 x 30 MM, starting at $10.99 for 2 Hood Rollers, choose up to 10 with shipping discount. 

$8.29

$10.99

Key Switch for Roll Shutters. Roll Shutter Gear Kit 7MM
SIMU Key SwitchRoll Shutter Gear Kit 7MM

UNIVERSAL Key Switches for Roll Shutters, by SIMU, Surface Mount, choose MOMENTARY or MAINTAIN Style. Comes with 3 Keys,...

Roll Shutter Gears, Select Plastic or Metal, Choose 11:1 Ratio or 8:1 Ratio. 7MM Hex. Each kit comes with the Roll Shutter Gear, a Gasket,...

$81.99

$44.99

HV Lock Dust Covers, Plastic HV Accordion Shutter Lock
Dust Covers for Shutter LocksHV Shutter Lock Kit

Dust Covers for HV or CF Shutter Locks, Choose either Keyed Locks or Thumb Turn Locks,.. Protects the lock from Rain, Dust, Bugs, and more. 

HV Shutter Lock Kit for Hurricane & Storm Shutters, Thumb Turn Egress Style or Keyed, for Accordion and Centerfold Shutter Types, 4 Colors...

$8.00

$13.99

Knurled Stud Screws for Storm Panel Tracks L-Handle Shutter Lock, Hi-Tech
Knurled Stud ScrewL-Handle HT Shutter Lock

Knurled Stud Screws, Stainless Steel, 1/4-20 Thread size, Select 3/4 or 1 inch Length, Select Quantity Desired from 12 to 100 pieces. 

L-Handle HT Shutter Lock, choose with Keys or Thumb Turn style, HT = Hi-Tech. Choose from 5 colors; White, Ivory, Chrome, Bronze, or Beige.

$10.99

$19.25

HV Plate Lock for Accordion Shutters Stainless Steel Thumb Screws, 2 sizes
HV Saltwater Plate LockThumb Screws, Stainless Steel

HV Saltwater Plate Lock with Black or White HV Turn Knob Screw, Solid Stainless Steel Lock Plate, and Stainless Steel Knob, 1 Pair... 

Stainless Steel Thumb Screws, 2 Sizes; 1/4-20 x 3/4" or 10-24 x 3/4", Select  total Pieces desired. Accordion Shutter Screws... for the locking pins

$24.99

$7.99

T-Handle Shutter Lock Kit Track Bolts
T-Handle Shutter Lock KitTrack Bolts, Stainless Steel

T-Handle Accordion Shutter Lock Kit for Centerfold type Hurricane Shutters, OEM Replacements, for Repair, 5 Colors to choose...

Track Bolts, Stainless Steel, Square Head, 1/4-20 Thread, 3/4" Length OR 1" Length, will not rust. Head is 1/2" Square....

$14.79

$5.49

Wheel Carriage Assembly for Shutters Washered Wingnuts for Storm Panels
Wheel Carriage Assembly HV Washered Wingnuts

Wheel Carriage Assembly, Complete Set up includes Screw, Hat Bushing, Spacer Bushing, and Wheel Carriage. White rollers, 4 sizes to choose from.

HV Washered Wingnuts , Super Heavy Duty Zamac Diecast, Nickel Plated, 1/4-20 Thread size, 7/8" or 1 1/8" Washer.

$9.99

$7.79

Thanks for visiting the Shutter Supply page. If you can't find what you need, Contact Us.