Storm Panel Parts

Economy Galvanized Steel Storm Panels, 2" Corrugated, by BERTHA®, Miami Dade HVHZ Approved, .028 Thick, Pick-up Only, No Shipping

Galvanized Steel Storm Panels, by BERTHA®, Miami Dade High Velocity Hurricane Zone Approved .030 Thick, Pick-up Only, No Shipping

2" Stud Set Screw, 304 Stainless Steel, 1/4-20 Thread size, Hex Allen Wrench insert

Aluminum Channel Rail 2" x 1" x .125", Heavy Duty, for Mechanical Fencing, or Storm Panel Track Buildouts, sold by foot lengths. 

Aluminum Channel Rail Outside Sleeve, 2 1/4" x 1 1/4" x .125" OD, Heavy Duty, for 2" x 1" OD Mechanical Fencing, or Storm Panel Track Buildouts, 6 foot lengths. 

Aluminum Channel Rail 2" x 2" x .125", Heavy Duty, for Mechanical Fencing, or Storm Panel Track Buildouts, sold by foot lengths. 

Aluminum Channel Rail 3" x 1" x .125", Heavy Duty, for Mechanical Fencing, or Storm Panel Track Buildouts, sold by foot lengths. 

Advertise on HurricaneShutterHardware.com , a Page 1 Ranked Website with visits by mostly Homeowners. Limited Categories and Advertisers!

Astroguard Hurricane Fabric Clips, Black Nylon, made by BERTHA, sold in Male and Female set as 1 piece, includes the screws, OEM Replacements 

Astroguard Storage Bag, Maroon, Red, or Black, 28.5 x 44 inches, made by BERTHA

Heavy Duty Painted Angle, 1" x 1" x 1/8", 4 Colors, Aluminum, made by BERTHA.

Heavy Duty Painted Angle, 1" x 2" x 1/8", 4 Colors, Aluminum, made by BERTHA.

Heavy Duty Painted Angle, 1" x 3" x 1/8", 4 Colors, Aluminum, made by BERTHA.

Heavy Duty Painted Angle, 2" x 2" x 1/8", 4 Colors, Aluminum, made by BERTHA.

Standard Painted Angle, 2" x 3" x 1/8", 4 Colors, Aluminum, made by BERTHA.

Heavy Duty Painted Angle, 2" x 4" x 1/8", 4 colors to choose, Aluminum, made by BERTHA.

Blank Angle Track Kit for Storm Panels, Make your own spacing! Choose Total Length, White or Bronze.

Bonded Washers, Stainless Steel washers heat bonded to rubber washers to make a 2 sided dual washer for many purposes, 1/4" hole. 3 sizes.

Build Out Header, 2 inch Build Out Distance, for 2 1/4" Rib Size Depth Panels, Choose Lengths up to 19', White only, by BERTHA

Build Out Header, 3 inch Build Out Distance, for 2 1/4" Rib Size Depth Panels, Choose Lengths up to 19', White only. By BERTHA

Build Out Header for 2" size Ribbed Panels, 2 inch Mounting Build Out Distance, Choose Lengths to 6', Select White or Bronze

Build Out Header for 2" size Ribbed Panels, 3 inch Mounting Build Out Distance, Choose Lengths to 6', Select White or Bronze

Combo Brass Lead Anchors, for use with any size length 1/4-20 bolt, pass thru style. Zamac Body / Brass Core. Bolt Anchor Fastener is...

Combo Drill Bit, 1/4" x 1/2" x 2", Domestic Professional Version, used to drill perfect pilot holes and counter sink for Anchors. 

Combo Truss Bolts, 1/4-20 Thread Size, Choose Length. They have a Round Pan Head, combination Phillips - Slotted...

DOORSHIELD Impact Resistant Storm Panel Kit, for Emergency Coverage of Glass Doors, Easily connects and disassembles, Clear or Aluminum Panels

Socket Power Bit Extension Driver, 1/4 x 6 Inches, Hex, Magnetic, Pro Quality, Made in the USA.

Socket Power Bit Extension Driver, 3/8 x 4 inch, Pro Quality. Made in the USA.

Socket Power Bit Extension Driver, 5/16 x 6 Inches, Hex, Magnetic, Pro Quality, Made in the USA.

Heavy Duty Square Tube, 1" x 1" x 1/8", Aluminum, mill finish Silver Only. Choose Length....

Locking Hole Plugs for Roll Shutter Tracks and Bahama Shutter Arm Poles, Black or White, Many Sizes to choose from. Select Size, then...

Nitrile Palm Coated HPPE Level 5 Cut Resistant Hand Gloves for Auto Repair, Medical, Police, and Kitchen use. Best you can get.

Standard Painted Rectangle Tube, 2" x 1" x 1/8", 4 Colors, Aluminum, made by BERTHA.

Heavy Duty Painted Square Tube, 2" x 2" x 1/8", 4 Colors, Aluminum, made by BERTHA.

Heavy Duty Painted Square Tube, 3" x 3" x 1/8", 4 Colors, Aluminum, made by BERTHA.

Panelmate Plus Anchors, made of 18-8 Stainless Steel, for Wood Applications

Panelmate Pro Anchors 3.25", 2 Stud Sizes, Choose total Pieces desired, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

Panelmate Pro Anchors, Extra Large, 3 Sizes with 1 1/8" Stud, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

Rapidset Tool for Lead Anchors, Professional Model, not a punch its a threaded power bit that screws the anchor to set it in place, for 1/4-20 size threads. 2 Sizes.

Screw Protectors for Panelmate Pro Anchors, White Nylon Caps, UV Resistant, 1 1/8" Long, or use for any 1/4-20 size thread screw or bolt.

SDS TAPCON Bit Adapter, comes with the allen wrench.

Combo Sidewalk Bolt Lead Anchors, for use with any size length 1/4-20 bolt, pass thru style. Zamac Body / Lead Core. Bolt Anchor Fastener is...

2” STORM BAR CLIP, also called a Tie Back Clip, Aluminum Mill Finish with holes. Receives 2” Square Tube 

Studded Angle Track for Storm Panels, 12"OC, Choose Total Length, Choose White or Bronze. The Studs are 1/4-20 Thread x 3/4" Long. BERTHA

Studded Reverse Angle Track for Storm Panels, 12"OC, Choose Total Length, White only. The Studs are 1/4-20 Thread x 3/4" Long. By BERTHA

Studded Reverse Angle Track for Storm Panels, 6"OC, Choose White or Bronze. The Studs are 1/4-20 Thread x 3/4" Long. By BERTHA

Studless Buildout Track, 2 inch, made by BERTHA, White or Bronze, Choose Lengths up to 20 feet.

Studless Buildout Track, 3 inch, made by BERTHA, White only, Choose Lengths up to 20 feet.

Tapcon Screws 1-3/4", Storm Guard, Carbon Steel with Ultra Shield, a High Performance Screw for direct mounting to Wood, Concrete,...

Tapcon Screws 2 1/4", Storm Guard, Carbon Steel with Ultra Shield, a High Performance Screw for direct mounting to Wood, Concrete,...

Tapcon Large Flange Screws 3-1/4", Storm Guard, Carbon Steel with Ultra Shield, a High Performance Screw for direct mounting to Wood, Concrete,...

HPPE EN388 Level 5 Protection Touch Screen cut resistant proof gloves for Kitchen or Security, or Work use.

Track Bolt Strap, and Bolt Aligner for studless tracks. This Multi Purpose vinyl strapping strip has holes every 6" to fit over your track bolts and stop the chattering

White Aluminum Storm Panels, .050 Miami Dade Approved HVHZ, BERTHA, Custom Cut to your size, PICK UP ONLY, NO SHIPPING

Wingnut Power Driver Bit, fits many size wingnuts, from 10-32 to 5/16" thread. Heavy Duty industrial strength metal. Shutter Tools...

Aluminum Storm Panels, 2 1/4", BERTHA .050 Aluminum Sheets, 12" wide. Choose Length, CUSTOM CUT SIZES. Pick-up only, No Shipping

Brass Wood Bushing Anchors, Slotted, 1/4-20 Inner Thread, Wood Anchor Bushing is 3/4" Long by 1/2" Diameter, choose Quantity.

BERTHA Build Out Header, 1 inch Build Out Distance, for 2 1/4" Rib Size Depth Panels, Choose Lengths up to 19', Select White or Bronze.

Build Out Header for 2" size Ribbed Panels, 1 inch Mounting Build Out Distance, Choose Lengths to 6', Select White or,...

BERTHA Clear Storm Panels, Polycarbonate 2" Rib Size. Miami Dade Hurricane Zone Code Approved. PICK-UP ONLY, NO SHIPPING

Drive Socket for Panelmate Pro or Panelmate Plus type screws, 3/16" Hex. This Bit is what the Pro's use, made to last.

H-Header, Top Track for Storm Panels, by BERTHA, Choose White or Bronze, Choose Total Length, for 2 1/4" Rib Size Panels. Up to 6'...

H Header for 2" Rib Size Depth Panels, Top Bracket Brace, Choose Length, Select White or Bronze. By BERTHA. We only ship lengths up to 6 feet,...

HV Washered Wingnuts , Super Heavy Duty Zamac Diecast, Nickel Plated, 1/4-20 Thread size, 7/8" or 1 1/8" Washer.

Aluminum Keyhole Washers, Select 25 pieces to 100. Most commonly used with Combo Truss Machine Screws size 1/4-20, but these,...

Knurled Stud Screws, Stainless Steel, 1/4-20 Thread size, Select 3/4 or 1 inch Length, Select Quantity Desired from 12 to 100 pieces. 

Mustache Clips for Storm Panels and Shutters, These Mustache Clips are for the older style storm panels, High Strength Stainless Steel.

Panelmate Combo Bit, Domestic (Made in USA), this is Professional Grade made to last. For Concrete, Block,.. not wood.

Panelmate Female Insert Anchors for Concrete, includes Bonded Washers, 2 sizes, choose Total Pieces desired. Needs a 5/16" Hex Driver to install. 

Panelmate Pro Anchors 2.25", 2 Stud Sizes, Choose total Pieces desired, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

Panelmate Female Anchors, 4 sizes, select Total Pieces Desired. These have a 1/4-20 threaded hole, and a 5/16" Hex Driver is needed 

Panelmate Insert Driver Power Bit, for Female type Panelmate Anchors, 5/16" Hex, 3" Long hardened Steel. 

Panelmate Pro Male Anchors, Stainless Steel with Silver Stalguard Coating, 14 x 1 3/4", with 1/4-20 x 1/2" threaded hole. Needs a 3/8" Hex Socket to screw in.

Click this $$$ product to pay for a Custom Phone Order, or for Expedited Shipping, or...

Push In Screw Plugs, White Nylon, for Panelmate Pro Female Anchors, they Push in but need a Screwdriver to remove, can be used as an Automotive clip,.. 2 Sizes

Sidewalk Bolt Power Bit, works for both Combo and Slotted Sidewalk Bolts. Beveled Spring Loaded Sheath. Bit is 4" long, made of High Strength Carbon Steel,..

Sidewalk Combination Bolts, 1/4-20 Thread Size, 1/2" - 2 1/2". They have a Flat Round Head with Beveled edges, Phillips - Slotted...

HV Snap Track Cap End Plate, for HV Studded Plate with Cover, By BERTHA 

Order 4 clips to 100.

Studded Angle Track for Storm Panels, 6"OC, Choose Total Length, Choose White or Bronze. The Studs are 1/4-20 Thread x 3/4" Long.

HV Studded Track Plate and Cover, 6 or 12 inch on center, for use with Storm Panels. Choose desired Length. Aluminum. White only.

Low Profile Studded Track, should only be used in narrow walkways, White Only, 6 inch or 12 inch Stud Spacing. Choose Length. BERTHA

Studless Angle Track for Storm Panels, 90 Degree, White or Bronze, Choose Lengths up to 20 feet, made by BERTHA. 

Studless Buildout Track, 1 inch, made by BERTHA, White or Bronze, Choose Lengths up to 20 feet.

Studless Flat F Track for Storm Panels, White or Bronze, Choose Length. Made by BERTHA, Requires Track Bolts sold seperately, 1 3/4" wide x 3/8" height

Studless Reverse F Track for Storm Panels, Choose sizes from 1.5 feet to 20 feet, White Only, made by BERTHA

Tapcon Anchors, Storm Guard, Carbon Steel with Ultra Shield, 2 Sizes, a High Performance Anchor for direct mount panels to Wood, Concrete,...

Track Bolts, Stainless Steel, Square Head, 1/4-20 Thread, 3/4" Length OR 1" Length, will not rust. Head is 1/2" Square....

HV Style Large Turn Knobs, Stainless Steel, 5/16-18 Thread Size by 1 inch Long, with Shoulder Stop, Choose Black or White,... Choose quantity from 4 pieces to 50

Ceiling U-Header for Storm Panels, the Top Track Channel, by BERTHA, Select Length, Pick White or Bronze. For 2 1/4" Rib Panels

Ceiling U-Header for Storm Panels, Top Track Channel, Many Sizes to Choose, Select Length, White or Bronze. For 2" Rib Panels, BERTHA.

Wingnut Hand Driver Tool for Hurricane Storm Panels and Shutters, Brand New, fits all wingnuts from size 10-32 to 5/16" Made in USA,...

Wood Bushing Insert Tool, Power Driver Style, 6 inch, for setting 1/4-20 Brass Wood Bushings.

Small Thumb Turn Knob Screws, 1/4-20 x 3/4", Stainless Steel, with Shoulder, Select from 6 pieces thru 50. Choose Black or White,...

Stainless Steel Thumb Screws, 3 Sizes; 1/4-20 x 3/4" or 1", and 10-24 x 3/4", Select  total Pieces desired. Accordion Shutter Screws... for the locking pins