|
|
|
|
|
|
Related Items
Universal Wireless Receiver for ALL BRANDS of Roll Shutter Motors, Hz Radio Control. Makes any Standard motor a Remote motor, or replaces an existing system. Includes the Remote!
433MHz - 120V/60Hz
1 Channel
This receiver works for motors up to 100NM
Features:
*Support Multiple Working Mode: Momentary, Toggle and Latching Mode.
*Support the type of remote control(Support Code): Learning Code(1527), Fixed Code(2262).
*Support storing the quantity of remote control: 25 Pcs(NOTE: The system can store for 25 pcs of remotes, if the remote get more than 25 pcs, the initial remote control will be lost).
*RF Working Mode: Superheterodyne Reception (Modulation Mode:ASK).
*Perfect suitable for remote control of electric lamp, electrically operated gate, electrically operated window, roller shutter door, garage door and other telecommand equipments.
*works perfect with our Transmitter
Specifications (Technical Index):
Model: KR2201-4
Product Type: Single Channel Remote Control Switch
Encoding Type: Intelligent Learning Code
RF Working Mode: Superheterodyne Reception
Modulation Mode:ASK
RF Frequency: 433MHz
Working Mode:Momentary, Toggle and Latching
Input Voltage: AC 85V~250V
Quiescent Current: 5mA
Receiving Sensitivity: >97dbm
Remote Control Range: >50m (Free Space)
Wired Connection Way: Fixed Wiring Pillar
Output Terminal: NO,COM,NC
NO: Normal Open(Output).
COM:Common(Output).
NC: Normal Close(Output).
Color: Green(PCB Board), Black (Outside Shell)
Circuit Board Size: 6.5 * 3.2 * 1.6cm/ 2.5 * 1.25 * 0.62in
Circuit Board Weight:20g / 0.7oz
Package Size:8.1 * 3.6 * 2.0cm / 3.1 * 1.2 * 0.78in
Package Weight: 45g /
Operation;
About Working Mode;
Momentary: Push the remote button, the relay connects, release the remote button, the relay dis-connects.
Toggle: Push once the remote button, the relay connects, push twice the remote button, the relay dis-connects.
Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Clearing the Code:
- Push the learning button on the receivers for 8 times, the codes will be cleaned.
- After clearning the code, all the remote control cannot work any more.
Learning the code: (momentary)
- Press the learning key on the receiver 1 times, Wait for a moment, the LED will be off, it comes into learning state.
- Press the remote button, LED indicator on the receiver board will flash then come off.
- After 3 seconds, the LED indicator will be on again, learning successfully.
Learning the code: (Toggle)
- Press the learning key on the receiver 2 times, Wait for a moment , the LED will be off, it comes into learning state.
- Press the remote button, LED indicator on the receiver board will flash then come off.
- After 3 seconds, the LED indicator will be on again, learning successfully.
Learning the code:(Interlocking)
Note: When you choose for Interlocking mode, in order to learn more remote control, you need to learn two different button, the first time learnt is for “ON”, the second time learnt for “OFF”.For example : button A = ON , button B = OFF
- Push the learning key on the receiver 3 times, the LED (on the Receiver) will blink 3 times.
- When the LED is on, press the button of the remote control (You want to let it learn). Push the remote button A, LED flash for 3 times. Push the remote button B, Led flash for 3 times. After 3 seconds , the LED indicator will be off , Learning to succeed.
- A = ON , B = OFF
